Home > Products > A

Airtac solenoid valve

Airtac solenoid valve


AIRTAC solenoid valve from the principle divided into three categories: (1) direct-acting solen
Asco solenoid valve

Asco solenoid valve


ASCO Valve is the worldwide leader in high quality solenoid valves. ASCO products are utilized on
Atos solenoid valve

Atos solenoid valve


Atos solenoid valves features: • shell- moulding castings, mass- machined by
A series

A series


The Series A solenoid valves are of the directly operated type and can be used with dry
AA series

AA series


TECHNICAL CHARACTERISTICS Ambient temperature (°C) -10 ÷ +50 Fluid temperature (°C) Max +
AB series

AB series


TECHNICAL CHARACTERISTICS Ambient temperature (°C) -10 ÷ +50 Fluid temperature (°C) Max +
ACDN series

ACDN series


Features 1 Robust Valve Design 2 Diaphragm Operation 3 Fully Ported Orifices for high Cv 4 Choic
ACPN series

ACPN series


Features Heavy Duty Valve Design Piston Operation Wide Temperature Range Capabilities Choice of
AP series

AP series


Series AP directly operated proportional valves are able to control air flows starting from a
ATEX,IP65,IP67,NSF series

ATEX,IP65,IP67,NSF series


Solenoid valve in Stainless steel AISI 316. 2/2 normally closed, 2/2 normally opened, 3 ways. Dire

ACL Solenoid valves series 700
ACL Solenoid valves series 700
Solenoid operated pinch valve with dry armature.The tube is the only part in contact with the fluid.The internal diameter determines the flow.Elimination of dirt traps. Maximisation of valve coefficient.Fluid flow can be bi-directional.CONSTRUCTIONBody: Anodized aluminiumYoke: Acetal copolymerArmatu
ACL Solenoid valves series 351
ACL Solenoid valves series 351
CONSTRUCTIONBody: Die-cast aluminiumArmature tube: Brass Plunger and core: Stainless steelSprings: Stainless steelSeal material: NBR FPM EPDM FEATURESMedia: Air, Neutral gasesAmbient teperatre: with class F coil -10℃+ 55℃ with class H coil -10℃+
ACL Solenoid valves series 350
ACL Solenoid valves series 350
CONSTRUCTIONBody: Die-cast aluminiumArmature tube: Brass Plunger and core: Stainless steelSprings: Stainless steelSeal material: NBR FPM EPDM FEATURESMedia: Air, Neutral gasesAmbient teperatre: with class F coil -10℃+ 55℃ with class H coil -10℃+
ACL Solenoid valves series 345
ACL Solenoid valves series 345
CONSTRUCTION Body: Acetal copolymer Internal parts: Acetal copolymer -Stainless steel Seal material: NBR FEATURES: Fixing method: M2.5 screws Max torque 0.5Nm Universal mounting position Fluid temperature: 50℃ max Ambient temperature: -15℃+ 50℃ Fluid: Air, Neutral gases Response t
ACL Solenoid valves series 340
ACL Solenoid valves series 340
CONSTRUCTIONBody: Acetal copolymerInternal parts: Acetal copolymer -Stainless steelSeal material: NBRFEATURES:Fixing method: M3 screws Max torque 0.5NmUniversal mounting positionFluid temperature: -15℃+ 50℃Fluid: Air, Neutral gasesResponse time: 10-15msManual override: Enclosed bi-
ACL Solenoid valves series 337
ACL Solenoid valves series 337
CONSTRUCTIONBody: Thermoplastic polymer: NSF, WRC, KTW, FDA certifiedArmature tube: Brass Plunger and core: Stainless steelSprings: Stainless steelSeal material: NBR food contact certified FPM food contact certified EPDM food contact certifiedFEATURESMaximum allowabl
ACL Solenoid valves series 335
ACL Solenoid valves series 335
CONSTRUCTIONBody: Thermoplastic polymer: NSF, WRC, KTW, FDA certifiedArmature tube: Brass chemically nickel platedPlunger and core: Stainless steelSprings: Stainless steelSeal material: NBR food contact certified FPM food contact certified EPDM food contact certified
ACL Solenoid valves series 330
ACL Solenoid valves series 330
CONSTRUCTION Body: Acetal copolymer Seal material: NBR FEATURES Maximum allowable pressure 0.5 bar Maximum fluid viscosity 25cSt(mm²/s) Ambient temperature: -10℃+ 45℃ Maximum fluid temperature +50℃ Universal mounting position ELECTRICAL OPERATING FEATURES Duty cycle: ED100% I
ACL Solenoid valves series 320
ACL Solenoid valves series 320
Solenoid valve 3 way direct acting poppet type.The balanced seal and the special constructionallows a big flow.The solenoid valve can be used as normally closed,normally open, mixer or diverte. CONSTRUCTIONBody: Anodized aluminium Armature tube: Stainless steelPlunger and core: Stainless steelSpr
ACL Solenoid valves series 314
ACL Solenoid valves series 314
CONSTRUCTIONBody: Brass Armature tube: Stainless steelPlunger and core: Stainless steelSprings: Stainless steelSeal material: NBR FPM EPDM FEATURESMaximum allowable pressure: maximum differential pressure+ 10%Maximum fluid viscosity 25cSt(mm²
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 430.9 ms