Home > Products > CEME SOLENOID VALVES > CEME REFRIGERANTS Solenoid Valves > CEME SOLENOID VALVES REFRIGERANTS Series 68AD

CEME SOLENOID VALVES REFRIGERANTS Series 68AD

SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.

GENERAL FEATURES
MIN. PRES: 0 bar
PARTS IN CONTACT WITH THE FLUID
SEALING PTFE
BODY: BRASS
INTERNAL PARTS: STAINLESS STEEL
FLUIDS ALL TYPE OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)
ONE WAY DIRECTION VALVE
NON-SERVICEABLE VALVE
VALVE SUPPLIED WITH: - THREE POLE PLUG CONNECTOR UNI ISO 4400 (DIN 43650A) -IP 65
- SCREW AND MOUNTING BRACKET, (EXCEPT FOR SERIES 6825)
MOUNTING POSITION: Any;to obtain the best performances the valves has to be installed with the coil vertical; the position with the coil downwards is not recommended.
AMBIENT TEMPERATURE: - 30 °C +80°C, in D.C. for temperatures higher than 40°C, the performances (M.O.P.D.) could decrease.
SPECIAL EXECUTIONS: SEALING IN NEOPRENE(6806-6812)
ACCESSORIES: NUT AND GASKET TO AID AGAINST HUMIDITY FOR THE COIL
SAE NUT FOR COPPER TUBE CONNECTION
CEME SOLENOID VALVES WATER Series 85

CEME SOLENOID VALVES WATER Series 85


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C. MIN. PRES: 0,25 BAR PARTS IN CONTACT WITH THE FLUID SEALING: NBR on request FPM - EPDM EPDM-KTW sealing approved and DVGW certified for interception of potable water BODY: BRASS INTERNAL PARTS: STAINLESS STEEL FLUIDS: WATER- AIR - LI
CEME SOLENOID VALVES STEAM Series 62

CEME SOLENOID VALVES STEAM Series 62


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPM - HNBRBODY: BRASS WITH SEALING SEAT IN STAINLESS STEELSTAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety sealing al
CEME SOLENOID VALVES IRON & CLEAN Series 5523

CEME SOLENOID VALVES IRON & CLEAN Series 5523


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES IRON & CLEAN Series 5513

CEME SOLENOID VALVES IRON & CLEAN Series 5513


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals
CEME SOLENOID VALVES IRON & CLEAN Series 5551

CEME SOLENOID VALVES IRON & CLEAN Series 5551


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES INNERT GAS Series 61

CEME SOLENOID VALVES INNERT GAS Series 61


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.O.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THR FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – LIGHT OILSSTANDARD VERSION: Normally opened, inlet from port 2SERVICEABLE VALVE MOUNTING PO
CEME SOLENOID VALVES AIR Series 52

CEME SOLENOID VALVES AIR Series 52


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C. (5201 N.O.)GENERAL FEATURES:MIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: FOOD GRADE EPDM - HNBR - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELVALVE SUPPLIED WITH BRASS TUBE GUIDE (5201, 5211, 5270)STAINLESS STEEL TUBE GUIDE (only for series
CEME SOLENOID VALVES IRON & CLEAN Series 5525

CEME SOLENOID VALVES IRON & CLEAN Series 5525


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES STEAM Series 52

CEME SOLENOID VALVES STEAM Series 52


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C. (5201 N.O.)GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: FOOD GRADE EPDM - HNBR - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELVALVE SUPPLIED WITH: BRASS TUBE GUIDE (5201, 5211, 5270) STAINLESS STEEL TUB
CEME SOLENOID VALVES REFRIGERANTS Series  68SC

CEME SOLENOID VALVES REFRIGERANTS Series 68SC


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0,1 barPARTS IN CONTACT WITH THE FLUIDSEALING: PTFEBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: ALL TYPE OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE VALVE SUPPLIED WITH: - THREE PO
CEME SOLENOID VALVES INNERT GAS Series 93

CEME SOLENOID VALVES INNERT GAS Series 93


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - FPM - EPDM-KTWBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (except for valve Ø 5).INTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR- GAS - STEAM – DIESEL OIL - NAFTAONE WAY DIRECTION VALVE
CEME SOLENOID VALVES AIR Series 65

CEME SOLENOID VALVES AIR Series 65


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.O.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALIND: PTFEBODY : BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTING POSI
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 980.1 ms