Home > Products > Honeywell solenoid valve > GK series > Honeywell standard solenoid valve for medium up to180 degree GK32F

Honeywell standard solenoid valve for medium up to180 degree GK32F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: viton and graphit
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar
Flanged version, material: cast iron GG25
DN size: 32mm
Kvs value: 16
Connections: flange
Honeywell standard solenoid valve for gaseous and liquid medium-GB20VA

Honeywell standard solenoid valve for gaseous and liquid medium-GB20VA


The 2/2-way valves of the GB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in
Honeywell solenoid valve(component tested) for neutral liquid medium-AV402MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV402MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Honeywell standard solenoid valve for medium up to180 degree GK40

Honeywell standard solenoid valve for medium up to180 degree GK40


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MA062 solenoid valve

Honeywell MA062 solenoid valve


MA: direct operated, angle construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder an
Honeywell standard solenoid valve for liquid medium-AB32

Honeywell standard solenoid valve for liquid medium-AB32


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell solenoid valve(component tested) for potable water AT10

Honeywell solenoid valve(component tested) for potable water AT10


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell solenoid valve(component tested) for potable water AT13

Honeywell solenoid valve(component tested) for potable water AT13


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell standard solenoid valve for medium up to180 degree GK50F

Honeywell standard solenoid valve for medium up to180 degree GK50F


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell standard solenoid valve for medium up to180 degree GK13

Honeywell standard solenoid valve for medium up to180 degree GK13


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MS104 solenoid valve

Honeywell MS104 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell solenoid valve(component tested) for potable water AT32

Honeywell solenoid valve(component tested) for potable water AT32


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell standard solenoid valve for gaseous and liquid medium-GB20

Honeywell standard solenoid valve for gaseous and liquid medium-GB20


The 2/2-way valves of the GB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1019.5 ms